The free Meesho label cropper for sellers. Crop your Meesho shipping label PDF in seconds, keep the invoice, and print on a 4x6 thermal printer or arrange 2, 4, 6 or 8 labels on one A4 page to save paper. No login, no watermark, nothing stored. Upload the "Sub Order Labels" PDF from your Meesho supplier panel to start.
Log in to the Meesho supplier panel and download the “Sub Order Labels” PDF for your orders. This is the shipping label PDF the label crop tool is built for.
Drop the PDF into the Meesho label cropper above. No account, login, email or signup is needed.
Pick “Just crop” for one trimmed label per page (best for 4x6 thermal printers), or “Crop & arrange” for 2, 4, 6 or 8 labels per A4 sheet.
Download the cropped shipping label PDF and print it. Your file is not stored anywhere.
Everything about Meesho label crop in one place: what a label crop tool is, why the default Meesho shipping label PDF wastes paper, how this free Meesho label cropper fixes it, and how to print cropped labels on a 4x6 thermal printer or on A4 sticker sheets in under a minute.
A label crop tool is a free online shipping label cropper. It takes the PDF you download from a marketplace and trims away the blank space on every page, so what is left is the part you actually print: the shipping label, the barcode, the address and the invoice. A good label cropper does this for the whole PDF in one go, so you never crop page by page. This label crop tool is built for Meesho sellers and works on the Meesho “Sub Order Labels” PDF.
Every time you download the “Sub Order Labels” PDF from your Meesho supplier panel, you get a full A4 page for every order, even though the shipping label, the barcode and the tax invoice only use the top part of that page. The rest is blank. On a thermal label roll, that blank space is either cut off awkwardly by the printer driver or forces you to shrink everything, which makes the barcode and address smaller and harder to scan. On a normal printer, you burn a full sheet for a label that could share the page with several others. With fifty or a hundred orders a day, that becomes a real cost in paper, ink and time. A Meesho label crop fixes all three problems at once.
Some sellers crop each page by hand in Word, Photoshop or a PDF editor. That is fine for five orders and painful for a hundred. It is also harder than it looks, because Meesho labels are not all the same height. Delhivery, Shadowfax, Valmo and ValmoPlus print their destination codes differently, sometimes on one line and sometimes stacked over three or four. A taller label box pushes the whole invoice down the page, so a crop that looks right on one label can slice through the invoice total on the next. A fixed-size crop will always fail on some pages.
This tool does not use one fixed crop height. It reads every page separately, finds where the invoice “Total” row sits on that page, and trims the blank space just below it. A short label and a tall label from the same PDF both come out cleanly cropped, with the full address, barcode, product details and tax invoice intact. You never have to check which courier printed which label, and you never have to draw a crop box.
Many sellers search for “Meesho label crop with invoice” because they want to keep the tax invoice for the parcel. This tool does exactly that. The label, the courier barcode and the tax invoice stay together on the page, and only the empty space below the invoice total is removed. That gives you a compact Meesho shipping label with invoice that is ready to stick on or slip into the packet.
Just crop keeps one label per page, sized to its real content. This is the one to use for a thermal label printer. Crop & arrange takes the same cropped labels and places 2, 4, 6 or 8 of them on one A4 sheet. Use it to save paper (8 labels on one sheet instead of 8 sheets), check a whole batch before printing, keep a copy for your packing table, or print on an office printer. The crop is identical in both modes; only the layout changes.
If you use a 4x6 inch thermal label printer such as Zebra, TSC, Godex, Xprinter, Munbyn or similar, choose “Just crop”. You get one trimmed shipping label per page with no wasted space. In the print dialog, set the paper size to 4x6 inches (100x150 mm) and choose “Fit to page” so the cropped label scales neatly onto the label. Because the blank area is gone, the barcode prints larger and scans faster at the courier hub.
If you print on a normal office printer, choose “Crop & arrange” and pick the layout that matches your sticker sheet. The sizes below match standard A4 sticker sheets.
| Labels per A4 page | Label cell size | Best for |
|---|---|---|
| 2 per page | Large, half page each | Easy reading and small batches |
| 4 per page | 99.1 × 139 mm | 4-label A4 sticker sheets |
| 6 per page | 99.1 × 93.1 mm | 6-label A4 sticker sheets |
| 8 per page | 99.1 × 67.7 mm | Maximum paper saving |
For a thermal printer, set the paper size in the print dialog to your label size (for example 4x6 inches) and choose “Fit to page” so the cropped label scales neatly onto the label. For “Crop & arrange” on an A4 printer, use A4 portrait at 100% (Actual size) so the grid prints as shown. If you print on A4 sticker sheets, the 4, 6 and 8 per page layouts are made to line up with the sticker cells (for example 6 per page = 99.1 x 93.1 mm), with a small safe gap inside each sticker. Never use “Fit to page” on sticker sheets, because it moves the labels off the stickers. Print one test page first when you change printer or paper, then print the whole batch.
If you ship 100 orders a day, the default Meesho PDF uses 100 sheets of A4. With 8 labels per page you use 13 sheets. Over a month that is roughly 2,600 sheets saved, along with the ink and the time you spend loading paper. Sellers who use thermal printers save label roll stock too, because every label is trimmed to its real height instead of wasting space on blank area.
It is built only for the Meesho “Sub Order Labels” format, so there is nothing to set up. It is free, it needs no login or email, it adds no watermark, and it does not keep a copy of your file. Because every page is measured on its own, the invoice total is not cut off when a label is taller than usual. For a seller who ships every day, that means less time on print settings, less wasted paper and fewer reprints. It suits small home-based Meesho sellers as well as warehouses and packing teams handling hundreds of orders.
Shipping labels contain customer names, addresses and phone numbers, so privacy matters. Your PDF is processed when you submit it and the cropped result goes straight back to your browser. Nothing is saved, shared or reused, and no account is needed.
A label crop tool trims a shipping label PDF so only the useful part is left. For Meesho, it removes the blank space on every page of the “Sub Order Labels” PDF, so you print less paper and your barcode and address stay big and easy to scan.
Download the “Sub Order Labels” PDF from your Meesho supplier panel, upload it to this Meesho label crop tool, choose “Just crop” or “Crop & arrange”, and download the result. It takes a few seconds.
Yes. It is 100% free, with no login, no signup, no watermark and no payment at any step.
Yes. The tax invoice stays attached under each label exactly as Meesho generated it. Only the empty space below the invoice total is trimmed, so you get a clean Meesho label crop with invoice.
Yes. Choose “Crop & arrange” and pick 2, 4, 6 or 8 labels per A4 page. Every label is cropped first and then placed in a neat grid, so you use far fewer sheets of paper.
Yes. Use “Just crop” to get one trimmed label per page, then set your paper size to 4x6 inches (100x150 mm) in the print dialog and choose “Fit to page”. This works with common thermal label printers.
Use “Crop & arrange” with 4, 6 or 8 labels per page, open the PDF and print on A4 portrait at 100% (Actual size). Never use “Fit to page” on sticker sheets, because it moves the labels off the stickers.
“Just crop” trims every page and keeps one label per page, ready for a thermal label printer. “Crop & arrange” also places 2, 4, 6 or 8 labels on one A4 sheet, which is useful for reviewing a batch or printing on a normal office printer.
Yes. The label box can be one to four lines tall depending on the courier code, so the tool measures every page on its own and crops right after the invoice total.
Meesho labels are not all the same height, so a fixed crop size slices through the invoice on taller labels. This tool measures each page separately, so the invoice total is never cut off.
No. Your PDF is processed when you submit it and the result is sent straight back to your browser. Nothing is kept after that.
You can upload up to 15 MB and 200 labels in one PDF, which is enough for a normal day of dispatch.
Upload the “Sub Order Labels” PDF downloaded from the Meesho supplier panel. Other PDFs, such as scanned images or files from other marketplaces, are not supported.
Yes. It runs in any modern browser on Android, iPhone, tablet, laptop or desktop, so you can crop Meesho labels from your phone.
Choose 8 per page. Eight labels on one sheet instead of eight sheets cuts your paper use by about 87%, and the layout lines up with standard 8-label A4 sticker sheets (99.1 x 67.7 mm).
Free label crop tool for Meesho sellers – Meesho label cropper, shipping label crop, 4x6 thermal and A4 print.